EpoxyStyle ESD™ Epoxy
Tough Epoxy Floor Finish For Industrial Environments Requiring ESD Protection
EpoxyStyle ESD™
An excellent entry level, high performing, static dissipative, thin-mil system for electronic assembly
Water-based, 2-part epoxy-acrylate finish designed for industrial areas such as shipping and receiving areas, warehouses, high-traffic aisles, and production floors. It is a great alternative to our interlocking and glue-down flooring and is a perfect solution for your other open area environments where downtime is not critical and the subfloor is in good enough of a condition to accept a finish.
![Epoxy 5 Gallon Bucket, 005](https://staticstop.com/wp-content/uploads/2021/04/Epoxy-5-Gallon-Bucket-005-scaled.jpg)
Easy to Apply
Using standard rollers, it is applied in 2 coats (minimum) and can be used for light traffic within 12 hours of application. Coverage is 400 to 600 square feet per gallon. EpoxyStyle ESD provides a uniform, matte finish. The final gloss can be enhanced by finishing with our DuraGuard ESD™ finish.
** EpoxyStyle is a thin-mil system and will not hide subfloor blemishes and may show roll on streaks **
![Boeing 787](https://staticstop.com/wp-content/uploads/2021/04/Boeing-787.jpg)
Key Benefits
- Low-Cost Finish For Areas Requiring Guaranteed Static Protection
- < 1Meg-Ohm Resistance; <25 Volt Generation
- Install Over Old VCT and Concrete
- Excellent Adhesion Characteristics
- Easy Application
- Low Odor
- Excellent Chemical and Abrasion Resistance
- Superior Toughness and Durability
![Epoxy Color Chips, IMG_20140821_100753424](https://staticstop.com/wp-content/uploads/2021/04/Epoxy-Color-Chips-IMG_20140821_100753424-scaled.jpg)
Recommended for the Following Areas:
- Electronics Manufacturing Areas
- Sensitive Product Storage Areas
- Transport Aisles
- Shipping and Receiving Areas
- Test Areas
- Server Rooms/Data Closets
- Test Labs
![Flextronix Epoxy 3](https://staticstop.com/wp-content/uploads/2021/04/Flextronix-Epoxy-3.jpg)